CFMOTO Service · Spokane Valley, WA
CFMOTO Service & Maintenance Schedule — UFORCE, CFORCE & ZFORCE
Your CFMOTO’s first (break-in) service is due at 20 engine hours or 200 miles, whichever comes first — and after that, the schedule runs on hours, miles, or time, whichever arrives first. Below is CFMOTO’s official maintenance schedule for the UFORCE, CFORCE and ZFORCE, which applies to all of these models regardless of year, followed by how to book factory-trained service here in Spokane Valley.
Break-in service — at 20 hours or 200 miles
The most important service in your machine’s life. It includes an engine oil, filter and strainer change, a valve-clearance check, air-filter and coolant checks, gear-case and transmission-oil checks, and a full brake, steering and fastener inspection. Don’t skip it — it sets up everything that follows, and it’s required to keep your warranty valid.
Ongoing maintenance schedule (whichever comes first)
| Service item | Hours | Miles | Time |
|---|---|---|---|
| Inspect brake pads | 10 | 100 | Monthly |
| Check battery; inspect engine hoses & seals | 20 | 200 | — |
| Inspect air filter — replace if dirty (never clean it) | 50 | 500 | — |
| General lubrication (fittings, pivots, cables) | 50 | 500 | 3 months |
| Front & rear gear-case (differential) oil | 50 | 500 | Yearly |
| Test cooling system; inspect radiator, steering, suspension, throttle | 50 | 500 | 6 months |
| Inspect CVT drive belt (replace as needed) | 50 | 1,500 | Yearly |
| Engine oil, filter & strainer change | 100 | 1,000 | Yearly |
| Inspect spark plug (replace if worn/fouled) | 100 | 2,000 | 2 years |
| Valve-clearance inspect & adjust | 100 | 2,000 | — |
| Fuel filter & high-pressure hoses (hoses every 4 yrs) | 100 | 2,000 | 2 years |
| Brake fluid change | 200 | 1,000 | 2 years |
| Engine coolant change | 200 | 4,000 | 2 years |
| Transmission oil | 200 | 2,000 | Yearly |
Run it hard? Cut the intervals in half. CFMOTO calls for halving these intervals for machines used in mud, dust, deep water, heavy loads, or extreme heat and cold — which covers a lot of how people actually ride around here. When in doubt, ask us.
Frequently asked questions
When is the first service due on a new CFMOTO?
At 20 engine hours or 200 miles, whichever comes first. This break-in service includes a full oil and filter change and a valve-clearance check, and it's the single most important service for long-term reliability.
How often does a CFMOTO need an oil change?
Change the engine oil, filter and strainer every 100 hours, 1,000 miles, or once a year, whichever comes first — and cut that in half if you run in mud, dust, water or heavy loads. The very first oil change comes sooner, at the 20-hour / 200-mile break-in.
When does a CFMOTO need a valve adjustment?
CFMOTO checks valve clearance first at the 20-hour break-in, then every 100 hours or 2,000 miles. It's a dealer job — bring it to our Spokane Valley service department.
How often should the CVT belt and coolant be done?
Inspect the CVT drive belt every 50 hours and replace it as needed, and change the engine coolant and brake fluid every 2 years. Our technicians handle all of it.
Do I have to service at a dealer to keep my CFMOTO warranty?
Yes — CFMOTO's warranty requires that scheduled maintenance follow the owner's-manual schedule and that warranty repairs be done by an authorized CFMOTO dealer. As your authorized dealer in Spokane Valley, we keep your records straight and your warranty protected.
How do I book CFMOTO service in Spokane?
Call or text (509) 892-6368, or stop by 7807 E Sprague Ave, Spokane Valley. Service is open Tuesday to Saturday, 9 to 5, closed Sunday and Monday.